Vista Awnings

Balcony-Terrace-Awnings

HORIZON AWNING
Mono-Bloc ready to install folding arm awnings. Components are mounted on a 40mm square tube which makes the awning very safe. The arms are made from heavy duty aluminum alloy section with one or two springs, integrated in black arms to guarantee tension of fabric in all projections. Operation is by means of a gear box with removable handle. Hear box ratio and number of springs depends on awning projection. Slope is adjustable between 10 degree to 45 degrees and with special brackets the slope can be adjusted up to 80 degrees.

Three models are available in Horizon
    Horizon I : maximum size, 3560×2000MM
    Horizon II : maximum size, 4740×2002 MM
    Horizon III : maximum size, 11710×3500 MM

REFLEX AWNING

  • Power coated Aluminum Profile of 18×45mm size.
  • Corners are mounded in Aluminum or Plastic and Powder and powder coated in White RAL 9010.
  • Hinges are made of Nylon. - Projection 600 mm, 750mm 900mm
  • Front Height 210mm, 263mm, 315mm
  • Height 690mm, 865mm, 1035mm - Maximum Width 3500mm


DUTCH REGULAR AWNING
Awning frame is made of powder coated Aluminum profile of 18×45mm size. Corners are molded in aluminum or plastic and are powder coated. Hinges are made of nylon. Fabric is stapled to aluminum profile & covered with matching color beadings. Ideal for windows and doors in homes and in front of shops.

Width 500mm (16’5”) (Maximum)
Projection 1500mm (4’11”) (Maximum)

PARISIAN AWNING

  • Powder coated Aluminum Profile of 18×45 mm. - Mounded Aluminum or plastic Corners
  • Hinges made of Nylon
  • Frame Powder Coated
  • The Awning cannot be retracted
  • Projection : 1200mm (3’11”) Maximum


Width 3000mm (9’10”) Maximum without Intermediate arm 5000mm (16’5”) Maximum with Intermediate arm

DUTCH CAP AWNING
Awning is shaped like a cap and it is one quarter of a sphere. Awning frame is made of powder coated Aluminum profile of 18×45mm size. Hinges are made of nylon. Fabric is stapled to aluminum profile and covered with matching color beadings. The height and the projection of the Awnings is same and the width is two times of projection. Ideal for window and doors in homes and in front of shops.

Width 3000mm (9’10”) (Maximum)
Projection 1500mm (4’11”) (Maximum)

FIXED PARISIAN AWNINGS
The Awning is custom made to the specific requirement of the customer. The framework is made of painted steel tubes. The fabric is stitched to the desired dimensions and fixed on the frame using nylon cord. The aluminum grommets on the fabric is laced by a nylon cord and tightened to the tensioning bar provided on the frame. The Awnings is ideal for covering large areas like terraces, very large openings shop fronts, car parks and commercial waiting areas.

Width: 3050mm (10’) (Minimum) 15250mm (50’) (Maximum)
Projection: 1000mm (3’3”) (Minimum) 3000mm (9’10”) Maximum

DAVY LEG AWNING
This Awning model can be used for Window and Doors where maximum projection is needed but, the height is limited

Power coated Aluminum or Plastic and powder coated & Hinges are made of Nylon.

  • Awnings available with or without folding system
  • Projection 750mm, 1000mm, 1200mm
  • Front Height 550mm 800mm 1000mm
  • Height 955mm 1170mm, 1370mm

 

PRISMA AWNING

  • Powder Coated Aluminum Profile of 18×45mm - Mounded Aluminum or plastic corners
  • Hinges made of Nylon
  • Frame Powder Coated
  • The Awnings cannot be retracted.
  • The Height of the Awning is fixed with respect of projection
  • Projection : 900mm (2’ 11”) Maximum
  • Width: 4000mm (13’) Maximum without intermediate arm 5000mm (16’5”) Maximum with Intermediate arm

 

FERRO-DROP ARM AWNING
Drop Arm Awning with Finials at either end of the fall bar to give an antique and decorative look. Manual operation with gear box and removable handle..

  • Maximum size 3550×1500mm (11 ‘8” × 4’11”)
  • Aluminum cast brackets for front or ceiling mounting Arms made of MS oval tube cast Aluminum arm brackets.
  • Projection 750mm to 1500mm in multiples of 250mm MSfall bar of 32mm dia.
  • Cast aluminum finials with the frame work Powder coated in black.
  • MS powder coated roller tube.
  • The width of the awning should be width of the window + 150mm on either side for proper coverage
  • Suggested projection: half the height of window.

 

NOVITA - DROP ARM AWNING

  • Maximum size: 4720×1500mm
  • Manual operation with gear box and removable handle.
  • The frame work is powder coated in white color. Aluminum cast brackets for front and ceiling fixing with the aluminum extruded fall far.
  • Suggested projection: Half the height of the window
  • While deciding the projection, make sure that there is a minimum gap of 1.8mtrs. between the ground and the drop arm bracket.
  • Height of the handle = Installation height -1200mm
  • The width of the awning should be width of the window + 150mm on either side for proper coverage.